GUIDE BARS AND STOPS 2EACH

The ZeroPlay Guide Bar is a “One-Touch Calibration” miter bar (9 ½” in length) that has two stacked half bars with opposing wedges that expand parallel evenly to fit the exact width of a standard miter slot, Shopsmith™ or even the tricky General’s miter slot.



Create perfectly square cross cut jigs without any trial and error set-screw adjustment along the miter bar,

Easily square jig to the blade adjustment while securing through the top of the sled

Build small cut-off jig easy to carry and store, or build large jig with ZeroPlay Guide Bars in tendon with custom spacing

Accurately check alignment of saw blade to the miter slot with a dial-indicator (not included)

Build your own unique jig or jigs with included plan

Retro-Fit your existing cross-cut jigs for improved precision

ZeroPlay Stops serve as an anchor for your clamping devices within the miter slot – shop build clamp plan included

Build table saw coving fence with the ZeroPlay Stop

ZeroPlay Stops limit the travel distance for specialty jig


Because the ZeroPlay Guide Bar is a full profile miter that fits the exact width of the miter slot, you have no side-to-side play within the miter slot. The ZeroPlay Guide Bar System is for those who demand absolute accuracy and have zero tolerance for mistakes. It opens a completely new approach to how your crosscut jig functions.